Cynhyrchion
h6 K10 gradd ddaear rhodenni carbide twngsten
Cyflwyniad Cynnyrch
Gellir defnyddio gwiail carbid wedi'i smentio ar gyfer gwneud melinau diwedd, darnau dril amrywiol, torrwr arbennig Automobile, torwyr arbennig injan, horoleg, prosesu torwyr arbennig, torrwr melino fertigol annatod, graver ac ati. Hefyd, gellir gwneud y gwialen carbid twngsten yn aloi caled punches, mandrels, canolfannau, ac offer trydylliad.
Nodweddion Cynnyrch
1. Gwrthwynebiad gwisgo da, caledwch uwch, manwl gywirdeb, gwell anffurfiad a gwrthsefyll torri esgyrn
2. Uwch offer allwthio awtomatig i gynhyrchu
3. sintro HIP a malu manwl gywir i sicrhau bod ganddynt berfformiad da
4. Mae amodau gwag a gorffenedig ar gael
5. Yn gallu cyrraedd wyneb effaith drych ar ôl malu a sgleinio'n gywir
Manylion Cynnyrch
Meintiau Cyfeiriedig
| Rhodenni carbid solet (hyd llawn) | |||||
| Enwol Dia | D(mm) | D(mm) | Hyd | Sylwadau | |
| D (mm) | Di-ddaear | h6 | mm | ||
| 0.5 | 0.7 | 0.5 | 310-330 | ||
| 0.8 | 1 | 0.8 | 310-330 | ||
| 1 | 1.2 | 1 | 310-330 | ||
| 1.5 | 1.7 | 1.5 | 310-330 | ||
| 1/16" | 1.5875 | 1.8 | 1.5875 | 12" -13" | maint modfedd |
| 2 | 2.2 | 2 | 310-330 | ||
| 2.35 | 2.55 | 2.35 | 310-330 | ||
| 3/32" | 2.38 | 2.6 | 2.38 | 12" -13" | maint modfedd |
| 2.5 | 2.7 | 2.5 | 310-330 | ||
| 3 | 3.2 | 3 | 310-330 | ||
| 1/8" | 3. 175 | 3.4 | 3. 175 | 12" -13" | maint modfedd |
| 3.5 | 3.7 | 3.5 | 310-330 | ||
| 5/32 | 3. 968 | 4.2 | 3. 968 | 12" -13" | maint modfedd |
| 4 | 4.2 | 4 | 310-330 | ||
| 4.5 | 4.5 | 310-330 | |||
| 3/16" | 4. 7625 | 5 | 4.762 | 12" -13" | maint modfedd |
| 5 | 5.2 | 5 | 310-330 | ||
| 5.5 | 5.7 | 5.5 | 310-330 | ||
| 6 | 6.2 | 6 | 310-330 | ||
| 1/4" | 6.35 | 6.6 | 6.35 | 12" -13" | maint modfedd |
| 6.5 | 6.7 | 6.5 | 310-330 | ||
| 7 | 7.2 | 7 | 310-330 | ||
| 7.5 | 7.7 | 7.5 | 310-330 | ||
| 5/16" | 7.937 | 8.2 | 7.937 | 12" -13" | maint modfedd |
| 8 | 8.2 | 8 | 310-330 | ||
| 8.5 | 8.7 | 8.5 | 310-330 | ||
| 9 | 9.2 | 9 | 310-330 | ||
| 9.5 | 9.7 | 9.5 | 310-330 | ||
| 3/8" | 9.525 | 9.7 | 9.525 | 12" -13" | maint modfedd |
| 10 | 10.2 | 10 | 310-330 | ||
| 10.5 | 10.7 | 10.5 | 310-330 | ||
| 11 | 11.2 | 11 | 310-330 | ||
| 7/16" | 11.11 | 11.3 | 11.11 | 12" -13" | maint modfedd |
| 11.5 | 11.7 | 11.5 | 310-330 | ||
| 12 | 12.2 | 12 | 310-330 | ||
| 12.5 | 12.7 | 12.5 | 310-330 | ||
| 1/2" | 12.7 | 12.9 | 12.7 | 12" -13" | maint modfedd |
| 13 | 13.2 | 13 | 310-330 | ||
| 13.5 | 13.7 | 13.5 | 310-330 | ||
| 14 | 14.2 | 14 | 310-330 | ||
| 9/16" | 14.288 | 14.5 | 14.288 | 12" -13" | maint modfedd |
| 14.5 | 14.7 | 14.5 | 310-330 | ||
| 15 | 15.2 | 15 | 310-330 | ||
| 15.5 | 15.7 | 15.5 | 310-330 | ||
| 5/8" | 15.875 | 16.1 | 15.875 | 12" -13" | maint modfedd |
| 16 | 16.2 | 16 | 310-330 | ||
| 16.5 | 16.7 | 16.5 | 310-330 | ||
| 17 | 17.2 | 17 | 310-330 | ||
| 17.5 | 17.7 | 17.5 | 310-330 | ||
| 18 | 18.2 | 18 | 310-330 | ||
| 18.5 | 18.7 | 18.5 | 310-330 | ||
| 19 | 19.2 | 19 | 310-330 | ||
| 3/4" | 19.05 | 19.3 | 19.05 | 12" -13" | maint modfedd |
| 19.5 | 19.7 | 19.5 | 310-330 | ||
| 20 | 20.2 | 20 | 310-330 | ||
| 20.5 | 20.7 | 20.5 | 310-330 | ||
| 21 | 21.2 | 21 | 310-330 | ||
| 21.5 | 21.7 | 21.5 | 310-330 | ||
| 22 | 22.2 | 22 | 310-330 | ||
| 22.5 | 22.7 | 22.5 | 310-330 | ||
| 23 | 23.2 | 23 | 310-330 | ||
| 23.5 | 23.7 | 23.5 | 310-330 | ||
| 24 | 24.2 | 24 | 310-330 | ||
| 24.5 | 24.7 | 24.5 | 310-330 | ||
| 25 | 25.2 | 25 | 310-330 | ||
| 1" | 25.4 | 25.7 | 25.4 | 12" -13" | maint modfedd |
| 26 | 26.3 | 26 | 310-330 | ||
| 27 | 27.2 | 27 | 310-330 | ||
| 28 | 28.2 | 28 | 310-331 | ||
| 29 | 29.2 | 29 | 310-333 | ||
| 30 | 30.2 | 30 | 310-334 | ||
| 31 | 31.2 | 31 | 310-335 | ||
| 1-1/4" | 31.75 | 32 | 31.75 | 12" -13" | maint modfedd |
| 32 | 32.2 | 32 | 310-336 | ||
| 33 | 33.2 | 33 | 310-337 | ||
| 34 | 34.2 | 34 | 310-338 | ||
| 35 | 35.2 | 35 | 310-339 | ||
| 36 | 36.2 | 36 | 310-340 | ||
| 37 | 37.2 | 37 | 310-341 | ||
| 38 | 38.2 | 38 | 310-342 | ||
| 1-1/2" | 38.1 | 38.4 | 38.1 | 12" -13" | maint modfedd |
| 39 | 39.2 | 39 | 310-343 | ||
| 40 | 40.2 | 40 | 310-344 | ||
| 42 | 42.2 | 42 | 310-344 | ||
Rhestr Graddau
| Gradd Cyflwyniad i Rodiau Carbide | |||||||
| Gradd | Co % | Maint grawn toiled | HRA | HV | Dwysedd (g/cm³） | Cryfder plygu (MPa) | Gwydnwch torri asgwrn （MNm-3/2) |
| KT10F | 6 | Submicron | 92.9 | 1840. llarieidd-dra eg | 14.8 | 3800 | 10 |
| KT10UF | 6 | aruchel | 93.8 | 2040 | 14.7 | 3200 | 9 |
| KT10NF | 6 | nanomedr | 94.5 | 2180. llarieidd-dra eg | 14.6 | 4000 | 9 |
| KT10C | 7 | Iawn | 90.7 | 1480. llarieidd-dra eg | 14.7 | 3800 | 12 |
| KT11F | 8 | Submicron | 92.3 | 1720. llarieidd-dra eg | 14.6 | 4100 | 10 |
| KT11UF | 8 | aruchel | 93.5 | 1960 | 14.5 | 3000 | 9 |
| KT12F | 9 | aruchel | 93.5 | 1960 | 14.4 | 4500 | 10 |
| KT12NF | 9 | nanomedr | 94.2 | 2100 | 14.3 | 4800 | 9 |
| KT15D | 9 | Submicron | 91.2 | 1520 | 14.4 | 4000 | 13 |
| KT15F | 10 | Submicron | 92.0 | 1670. llarieidd-dra eg | 14.3 | 4000 | 11 |
| KT20F | 10 | Submicron | 91.7 | 1620. llathredd eg | 14.4 | 4300 | 11 |
| KT20D | 10 | Submicron | 92.0 | 1670. llarieidd-dra eg | 14.3 | 4500 | 11 |
| KT25F | 12 | aruchel | 92.4 | 1740. llarieidd-dra eg | 14.1 | 5100 | 10 |
| KT25EF | 12 | aruchel | 92.2 | 1700 | 14.1 | 4800 | 10 |
| KT25D | 12 | aruchel | 91.5 | 1570 | 14.2 | 4200 | 13 |
| KT37NF | 15 | nanomedr | 92.0 | 1670. llarieidd-dra eg | 13.8 | 4800 | 10 |
Ysgrifennwch eich neges yma a'i hanfon atom
